4" LED Light Bar with adjustable flood light flip cover. Both lights can be used alone or together.
Flip Cover Flood Light Functions
- » Provides a strong protective cover with built-in low-energy consumption flood lights.
- » Protects front of light bar against dust, flying debris, weather and sun damage/discoloration.
- » Easily open/close the flip cover from one side with our patent pending spring knob and interlocking gear mechanism.
- » Prevents unintentional blinding due to accidental activation, headlight reflections, and/or glaring from sunlight.
- » Securely tighten easily at any of the adjustable angles or in the closed position.
- » Both the bright high-wattaged LEDs and flip cover LEDs can be used in conjunction or separately allowing for optional spot/flood/combo beams.
- » The adjustable design allows for controlled lighting on camp/work sites and to minimize disturbing others in operating areas.
- » Adjust to light the immediate path around the vehicle.
- » Doesn’t require extra space in your vehicle to stow like other light covers.
- » Flip cover LEDs are encased in epoxy for increased weatherproof durability and complete waterproofing protection.
Warnings
- » DO NOT OPEN COVER ON LOCAL ROADS OR HWY
- » CHECK & FOLLOW THE LAWS & RESTRICTIONS REGARDING USAGE OF THIS PRODUCT IN OPERATING ZONES
- » DO NOT STARE DIRECTLY INTO THE LIGHTS, IT MAY CAUSE TEMPORARY BLINDNESS AND/OR EYE DAMAGE
- » CAUTION WHILE ADJUSTING TO AVOID PINCHING
- » KENOH USA HOLDS ZERO LIABILITY OR RESPONSIBILITY FOR ANY DAMAGES & INJURIES RESULTING IN THE INSTALLATION OR USAGE OF THIS PRODUCT (PLEASE USE CAUTION)
- WARNING: CANCER AND REPRODUCTIVE HARM — WWW.P65WARNINGS.CA.GOV
Details
Technical Specs
- » 9~60V DC working voltage Main Light Bar: 4 x 3W CREE LEDs Flip Cover: 8 x 1W SMD LEDs encased in epoxy resin
- » Color temp: 6000K
- » Lumens: 800lm + 320lm
- » Wattage: 12W + 8W
- » IP67/68 dust & waterproof rating
- » Dimensions: 7.8cm(W) x 8.7cm(H) x 11.2cm(L)
- » Weight: 0.7kg
- » Extruded aluminum main body & cover housing, diecast aluminum side parts & mounting brackets, and polycarbonate lens
- » Customizable colors/patterns/logos available(for more information visit www.kenohusa.com/custom)
PARTS LIST
- 1 x Lightshield LED Light Bar
- No wiring harness on this one, pig tail only
- 1 x Side-Mounting Bracket Set
- 2 x Diecast Aluminum Mounts
- 2 x Rubber Mounting Pads
- 4 x Washer (2 x Locking Washers)
- 4 x Mounting Bolts (2 x Side Bolts)
- 2 x Mounting Bolt Nuts
- 1 x Allen Wrench